4-PMPD powder

Description

Our 4-PMPD powder is 4-PMPD supplied as loose powder, in 5g powder or 1g powder. Each batch is tested by LC-MS to 99% purity or higher. Prices start at $39.99. It’s sold for laboratory research only.

It’s also available as 4-PMPD liquid and 4-PMPD capsules. See all nootropic powders for more options in this format.

What is 4-PMPD?

4-PMPD is listed with CAS 31252-42-3 and formula C12H17N (MW 175.27), with 4-benzylpiperidine among its synonyms.

4-Benzylpiperidine is a monoamine releaser studied in rodents.

4-PMPD powder specifications

• Compound: 4-PMPD (4-Benzylpiperidine)
• CAS number: 31252-42-3
• Molecular formula: C12H17N
• Molecular weight: 175.27
• Purity: 99% or higher, tested by LC-MS
• Size: 5g powder and 1g powder
• Form: Loose powder
• Storage: Keep it in a cool, dry place away from direct sunlight
• Use: laboratory research only, not for human or veterinary use

Research on 4-PMPD

We aren’t aware of much peer-reviewed work on it, so treat it as a lightly characterised compound and plan your controls with that in mind.

Check the CAS number against your own records before you design experiments around it.

Search PubMed for the full studies. We stick to what’s been published.

Weighing and handling 4-PMPD powder

Loose powder is the most flexible way to buy 4-PMPD. You can weigh any amount you need, dissolve it in your own solvent, or fill your own capsules. It’s also the cheapest format per milligram.

For small amounts you’ll want a scale that reads to at least 0.01g, and ideally 0.001g. Our digital scale and micro scoops make it easier to get consistent measurements. Weigh onto clean weighing paper, and close the bag or jar straight after so the powder doesn’t pick up moisture.

Making a solution from 4-PMPD powder

To make a stock solution, decide on the final volume and concentration first. For 30mL at 10mg/mL you’d weigh 300mg of 4-PMPD, dissolve it in about 25mL of solvent, then top up to exactly 30mL.

Check the compound’s solubility in your chosen solvent before you start, and try a small test amount first. Store the finished solution in a labelled glass bottle.

4-PMPD quality and testing

We test each batch of 4-PMPD by LC-MS, which pairs liquid chromatography with mass spectrometry. The chromatography splits the sample into its components and the mass spectrometer identifies them, which tells you both identity and purity. This batch came in at 99% or higher.

Small differences between batches are normal, so write the batch number from the label into your records. If something looks wrong when your order arrives, like discoloured powder or a cloudy solution, set it aside and don’t use it.

Storage and handling

Keep it in a cool, dry place away from direct sunlight. Use a clean, dry scoop each time, and reseal the container straight away. Label anything you decant with the compound, amount and date, and keep it out of reach of children and pets.

Common questions about the 4-PMPD powder

What can I dissolve 4-PMPD powder in?

That depends on the compound’s solubility and your protocol. Check the solubility data for your solvent first, and test a small amount before making up a full batch.

What scale do I need?

One that reads to 0.01g at minimum, and 0.001g for very small amounts. Our pocket scale reads to 0.01g.

Is the 4-PMPD powder in stock?

Yes. Every option on this page is in stock and ready to ship.

Related nootropics

If you’re browsing for a study, you might also look at 5-Amino-1MQ powder, 4-DMA-7, 5-Deazaflavin powder and 1-MNA powder and capsules. Our main Nootropics page lists everything in the category.

Buy 4-PMPD powder online

Ordering takes a minute. Pick your option above, add it to your cart and check out. The 4-PMPD powder is in stock and ready to ship. Need other compounds for the same study? Browse nootropic powders or our lab supplies.

Sold for laboratory research use only. It isn’t for human or veterinary use, and it isn’t a food, drug or cosmetic.